rustdoc: load the set of in-scope traits for modules with no docstring
Fixes#93428
This fix is a response to a couple of special cases related to the `module_id`, which is eventually used for trait candidates:
* The module id is always set to the current crate, when checking `crate::`.
Normally, the set of in-scope traits would be set in `load_links_in_attrs`, but if there are no doc comments, then that loop will never run.
* the module id is set to the parent module, when resolving a module that is spelled like this:
// Notice how we use an outlined doc comment here!
// [`Test::my_fn`]
mod something {
}
As with the above problem with `crate::`, we need to make sure the module gets its traits in scope resolved, even if it has no doc comments of its own.
Move unstable is_{arch}_feature_detected! macros to std::arch
These macros are unstable, except for `is_x86_feature_detected` which is still exported from the crate root for backwards-compatibility.
This should unblock the stabilization of `is_aarch64_feature_detected`.
r? ```@m-ou-se```
Add note suggesting that predicate may be satisfied, but is not `const`
Not sure if we should be printing this in addition to, or perhaps _instead_ of the help message:
```
help: the trait `~const Add` is not implemented for `NonConstAdd`
```
Also added `ParamEnv::is_const` and `PolyTraitPredicate::is_const_if_const` and, in a separate commit, used those in other places instead of `== hir::Constness::Const`, etc.
r? ````@fee1-dead````
remove unused `jemallocator` crate
When it was noticed that the rustc binary wasn't actually using jemalloc via `#[global_allocator]` and that was removed, the dependency remained.
Tests pass locally with a `jemalloc = true` build, but I'll trigger a try build to ensure I haven't missed an edge-case somewhere.
r? ```@ghost``` until that completes
kmc-solid: Implement `net::FileDesc::duplicate`
This PR implements `std::sys::solid::net::FileDesc::duplicate`, which was accidentally left out when this target was added by #86191.
Add `intrinsics::const_deallocate`
Tracking issue: #79597
Related: #91884
This allows deallocation of a memory allocated by `intrinsics::const_allocate`. At the moment, this can be only used to reduce memory usage, but in the future this may be useful to detect memory leaks (If an allocated memory remains after evaluation, raise an error...?).
Bump libc and fix remove_dir_all on Fuchsia after CVE fix
With the previous `is_dir` impl, we would attempt to unlink
a directory in the None branch, but Fuchsia supports returning
ENOTEMPTY from unlinkat() without the AT_REMOVEDIR flag because
we don't currently differentiate unlinking files and directories
by default.
On the Fuchsia side I've opened https://fxbug.dev/92273 to discuss
whether this is the correct behavior, but it doesn't seem like
addressing the error code is necessary to make our tests happy.
Depends on https://github.com/rust-lang/libc/pull/2654 since we
apparently haven't needed to reference DT_UNKNOWN before this.
Rollup of 10 pull requests
Successful merges:
- #92611 (Add links to the reference and rust by example for asm! docs and lints)
- #93158 (wasi: implement `sock_accept` and enable networking)
- #93239 (Add os::unix::net::SocketAddr::from_path)
- #93261 (Some unwinding related cg_ssa cleanups)
- #93295 (Avoid double panics when using `TempDir` in tests)
- #93353 (Unimpl {Add,Sub,Mul,Div,Rem,BitXor,BitOr,BitAnd}<$t> for Saturating<$t>)
- #93356 (Edit docs introduction for `std::cmp::PartialOrd`)
- #93375 (fix typo `documenation`)
- #93399 (rustbuild: Fix compiletest warning when building outside of root.)
- #93404 (Fix a typo from #92899)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
With the previous `is_dir` impl, we would attempt to unlink
a directory in the None branch, but Fuchsia supports returning
ENOTEMPTY from unlinkat() without the AT_REMOVEDIR flag because
we don't currently differentiate unlinking files and directories
by default.
On the Fuchsia side I've opened https://fxbug.dev/92273 to discuss
whether this is the correct behavior, but it doesn't seem like
addressing the error code is necessary to make our tests happy.
Updates std's libc crate to include DT_UNKNOWN for Fuchsia.
Fixes#93428
This fix is a response to a couple of special cases related to the
`module_id`, which is eventually used for trait candidates:
* The module id is always set to the current crate, when checking `crate::`.
Normally, the set of in-scope traits would be set in `load_links_in_attrs`,
but if there are no doc comments, then that loop will never run.
* the module id is set to the parent module, when resolving a module
that is spelled like this:
// Notice how we use an outlined doc comment here!
// [`Test::my_fn`]
mod something {
}
As with the above problem with `crate::`, we need to make sure the
module gets its traits in scope resolved, even if it has no doc comments
of its own.
rustbuild: Fix compiletest warning when building outside of root.
This fixes a warning that would happen when passing arguments to compiletest (like `x.py test src/test/ui`) when running `x.py` outside of the root source directory. For example, the CI builders do this, which causes a confusing warning message. This also fixes it so that passing a full path works (like `x.py test src/test/ui/hello.rs`) in the same scenario (previously it would just ignore the `hello.rs` part).
Unimpl {Add,Sub,Mul,Div,Rem,BitXor,BitOr,BitAnd}<$t> for Saturating<$t>
Tracking issue #92354
Analog to 9648b313cc#93208 reduce `saturating_int_assign_impl` (#93208) to:
```rust
let mut value = Saturating(2u8);
value += 3u8;
value -= 1u8;
value *= 2u8;
value /= 2u8;
value %= 2u8;
value ^= 255u8;
value |= 123u8;
value &= 2u8;
```
See https://github.com/rust-lang/rust/pull/93208#issuecomment-1022564429
Avoid double panics when using `TempDir` in tests
`TempDir` could panic on drop if `remove_dir_all` returns an error. If this happens while already panicking, the test process would abort and therefore not show the test results.
This PR tries to avoid such double panics.
Add os::unix::net::SocketAddr::from_path
Creates a new SocketAddr from a path, supports both regular paths and
abstract namespaces.
Note that `SocketAddr::from_abstract_namespace` could be removed after this as `SocketAddr::unix` also supports abstract namespaces.
Updates #65275
Unblocks https://github.com/tokio-rs/mio/issues/1527
r? `@m-ou-se`
wasi: implement `sock_accept` and enable networking
With the addition of `sock_accept()` to snapshot1, simple networking via a passed `TcpListener` is possible. This PR implements the basics to make a simple server work.
See also:
* [wasmtime tracking issue](https://github.com/bytecodealliance/wasmtime/issues/3730)
* [wasmtime PR](https://github.com/bytecodealliance/wasmtime/pull/3711)
TODO:
* [ ] Discussion of `SocketAddr` return value for `::accept()`
```rust
Ok((
TcpStream::from_inner(unsafe { Socket::from_raw_fd(fd as _) }),
// WASI has no concept of SocketAddr yet
// return an unspecified IPv4Addr
SocketAddr::new(Ipv4Addr::UNSPECIFIED.into(), 0),
))
```
Add links to the reference and rust by example for asm! docs and lints
These were previously removed in #91728 due to broken links.
cc ``@ehuss`` since this updates the rust-by-example submodule
Fix debuginfo for pointers/references to unsized types
This PR makes the compiler emit fat pointer debuginfo in all cases. Before, we sometimes got thin-pointer debuginfo, making it impossible to fully interpret the pointed to memory in debuggers. The code is actually cleaner now, especially around generation of trait object pointer debuginfo.
Fixes https://github.com/rust-lang/rust/issues/92718
~~Blocked on https://github.com/rust-lang/rust/pull/92729.~~
With the addition of `sock_accept()` to snapshot1, simple networking via
a passed `TcpListener` is possible. This patch implements the basics to
make a simple server work.
Signed-off-by: Harald Hoyer <harald@profian.com>
Suggest tuple-parentheses for enum variants
This follows on from #86493 / #86481, making the parentheses suggestion. To summarise, given the following code:
```rust
fn f() -> Option<(i32, i8)> {
Some(1, 2)
}
```
The current output is:
```
error[E0061]: this enum variant takes 1 argument but 2 arguments were supplied
--> b.rs:2:5
|
2 | Some(1, 2)
| ^^^^ - - supplied 2 arguments
| |
| expected 1 argument
error: aborting due to previous error
For more information about this error, try `rustc --explain E0061`.
```
With this change, `rustc` will now suggest parentheses when:
- The callee is expecting a single tuple argument
- The number of arguments passed matches the element count in the above tuple
- The arguments' types match the tuple's fields
```
error[E0061]: this enum variant takes 1 argument but 2 arguments were supplied
--> b.rs:2:5
|
2 | Some(1, 2)
| ^^^^ - - supplied 2 arguments
|
help: use parentheses to construct a tuple
|
2 | Some((1, 2))
| + +
```
Matthias Krüger
