Morph `layout_raw` query into `layout_of`.
Before this PR, `LayoutCx::layout_of` wrapped the `layout_raw` query, to:
* normalize the type, before attempting to compute the layout
* pass the layout to `record_layout_for_printing`, for `-Zprint-type-sizes`
Moving those two responsibilities into the query may reduce overhead (due to cached calls skipping those steps), but I want to do a perf run to know.
One of the changes I had to make was changing the return type of the query, to be able to both get out the type produced by normalizing inside the query *and* to match the signature of the old `TyCtxt::layout_of`. This change may be worse, perf-wise, so that's another reason I want to check.
r? `@nagisa` cc `@oli-obk`
Use undef for uninitialized bytes in constants
Fixes#83657
This generates good code when the const is fully uninit, e.g.
```rust
#[no_mangle]
pub const fn fully_uninit() -> MaybeUninit<[u8; 10]> {
const M: MaybeUninit<[u8; 10]> = MaybeUninit::uninit();
M
}
```
generates
```asm
fully_uninit:
ret
```
as you would expect.
There is no improvement, however, when it's partially uninit, e.g.
```rust
pub struct PartiallyUninit {
x: u64,
y: MaybeUninit<[u8; 10]>
}
#[no_mangle]
pub const fn partially_uninit() -> PartiallyUninit {
const X: PartiallyUninit = PartiallyUninit { x: 0xdeadbeefcafe, y: MaybeUninit::uninit() };
X
}
```
generates
```asm
partially_uninit:
mov rax, rdi
mov rcx, qword ptr [rip + .L__unnamed_1+16]
mov qword ptr [rdi + 16], rcx
movups xmm0, xmmword ptr [rip + .L__unnamed_1]
movups xmmword ptr [rdi], xmm0
ret
.L__unnamed_1:
.asciz "\376\312\357\276\255\336\000"
.zero 16
.size .L__unnamed_1, 24
```
which copies a bunch of zeros in place of the undef bytes, the same as before this change.
Edit: generating partially-undef constants isn't viable at the moment anyways due to #84565, so it's disabled
PGO for LLVM builds on x86_64-unknown-linux-gnu in CI
This shows up to 6% less instruction counts with larger - up to 18% - wins on cycles
on multiple benchmarks, and up to 19% wins on the -j1 wall times for rustc self-compilation.
We can afford to spend the extra cycles building LLVM essentially once more for
the x86_64-unknown-linux-gnu CI build today. The builder finishes in around 50
minutes on average, and this adds just 10 more minutes. Given the sizeable
improvements in compiler performance, this is definitely worth it.
This skips bumping Windows sccache because we run into compilation failures when
doing so (-m32 not supported by clang-cl?). Not clear on cause, but seems
easiest to just hold back.
This should avoid PGO-related failures encountered on Linux, and more broadly
seems like a good idea on other platforms as well (though it is likely not
necessary right this moment).
Normalize projections under binders
Fixes#70243Fixes#70120Fixes#62529Fixes#87219
Issues to followup on after (probably fixed, but no test added here):
#76956#56556#79207#85636
r? `@nikomatsakis`
Update books
## reference
1 commits in 4884fe45c14f8b22121760fb117181bb4da8dfe0..da6ea9b03f74cae0a292f40315723d7a3a973637
2021-07-28 21:31:28 -0700 to 2021-08-19 21:28:10 -0700
- Allow users to change status labels (rust-lang/reference#1083)
## book
7 commits in 7e49659102f0977d9142190e1ba23345c0f00eb1..687e21bde2ea10c261f79fa14797c5137425098d
2021-08-03 21:41:35 -0400 to 2021-08-18 20:48:38 -0400
- Small tweaks to Ferris size and position
- Retain previous height: auto just in case
- Shrink and move ferris when possible
- Snapshot chapter 6 for nostarch
- Demonstrate variable as catch-all for match. Fixesrust-lang/book#1868.
- Improve the if let example to have a binding pattern. Fixesrust-lang/book#1401.
- Fixes typo (rust-lang/book#2816)
## rust-by-example
1 commits in 0dc9cd4e89f00cb5230f120e1a083916386e422b..04f489c889235fe3b6dfe678ae5410d07deda958
2021-07-23 09:14:27 -0300 to 2021-08-17 08:01:20 -0300
- Grammar mistake (rust-lang/rust-by-example#1456)
## rustc-dev-guide
5 commits in c4644b427cbdaafc7a87be0ccdf5d8aaa07ac35f..cf0e151b7925a40f13fbc6573c6f97d5f94c7c17
2021-08-10 20:41:44 +0900 to 2021-08-22 11:47:02 -0300
- Fix typo “a Rc” → “an Rc” (rust-lang/rustc-dev-guide#1191)
- Expand THIR section with more details (rust-lang/rustc-dev-guide#1183)
- Remove docs for old -Z profile-queries flag
- update mdbook version to latest
- allow to quickly edit a page directly on github
Fix typo “a Rc” → “an Rc” (and a few more)
After stumbling about it in the dev-guide, I’ve devided to eliminate all mentions of “a Rc”, replacing it with “an Rc”. E.g.
```plain
$ rg "(^|[^'])\ba\b[^\w=:]*\bRc"
compiler/rustc_data_structures/src/owning_ref/mod.rs
1149:/// Typedef of a owning reference that uses a `Rc` as the owner.
library/std/src/ffi/os_str.rs
919: /// Converts a [`OsString`] into a [`Rc`]`<OsStr>` without copying or allocating.
library/std/src/ffi/c_str.rs
961: /// Converts a [`CString`] into a [`Rc`]`<CStr>` without copying or allocating.
src/doc/rustc-dev-guide/src/query.md
61:are cheaply cloneable; insert a `Rc` if necessary).
src/doc/book/src/ch15-06-reference-cycles.md
72:decreases the reference count of the `a` `Rc<List>` instance from 2 to 1 as
library/alloc/src/rc.rs
1746: /// Converts a generic type `T` into a `Rc<T>`
```
_(the match in the book is a false positive)_
Since the dev-guide is a submodule, it’s getting a separate PR: rust-lang/rustc-dev-guide#1191
I’ve also gone ahead and done the same search for `RwLock` and hit a few cases in the `OwningRef` adaption. Then, I couldn’t keep the countless cases of “a owning …” or “a owner” unaddressed, which concludes this PR.
`@rustbot` label C-cleanup
Refactor `named_asm_labels` to a HIR lint
As discussed on #88169, the `named_asm_labels` lint could be moved to a HIR lint. That allows future lints or custom plugins or clippy lints to more easily access the `asm!` macro's data and create better error messages with the lints.
bootstrap.py: recognize riscv64 when auto-detect
The architecture auto-detect table has no entry for riscv64 (which rustc
uses riscv64gc for the first part of triplet, assuming it's a generic
Linux distro).
Add it to the table to allow riscv64 systems to bootstrap Rust.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
add Cell::as_array_of_cells, similar to Cell::as_slice_of_cells
I'd like to propose adding `Cell::as_array_of_cells`, as a natural analog to `Cell::as_slice_of_cells`. I don't have a specific use case in mind, other than that supporting slices but not arrays feels like a gap. Do other folks agree with that intuition? Would this addition be substantial enough to need an RFC?
---
Previously, converting `&mut [T; N]` to `&[Cell<T>; N]` looks like this:
```rust
let array = &mut [1, 2, 3];
let cells: &[Cell<i32>; 3] = Cell::from_mut(&mut array[..])
.as_slice_of_cells()
.try_into()
.unwrap();
```
With this new helper method, it looks like this:
```rust
let array = &mut [1, 2, 3];
let cells = Cell::from_mut(array).as_array_of_cells();
```
Don't mark `if_let_guard` as an incomplete feature
I don't think there is any reason for `if_let_guard` to be an incomplete feature, and I think the reason they were marked in the first place was simply because they weren't implemented at all.
r? `@pnkfelix`
cc tracking issue #51114
Correctly handle remapping from path containing the current directory with trailing paths
If we have a `auxiliary/lib.rs`, and we generate the metadata with `--remap-path-prefix $PWD/auxiliary=xyz`, the path to `$PWD/auxiliary/lib.rs` won't be correctly remapped in the metadata. This is because internally, path to the working directory itself and relative paths to files under the working directory are remapped separately (hence neither are affected since neither has `$PWD/auxiliary` as prefix), but the concatenation between the working directory and the relative path is not remapped. This PR fixes that.
Improve detection of generics on lang items
Adds detection for the required generics for all lang items. Many lang items require an exact or minimum amount of generic arguments and if they don't exist, the compiler will ICE. This does not add any additional validation about bounds on generics or any other lang item restrictions.
Fixes one of the ICEs in #87573
cc `@FabianWolff`
Improve liveness analysis for generators
Liveness analysis for generators assumes that execution always continues
normally after a yield point, not accounting for the fact that generator
could be dropped before completion.
If generators captures any variables by reference, those variables could
be used within a generator, or when the generator completes, but also
after each yield point in the case the generator is dropped.
Account for the case when generator is dropped after yielding, but
before running to the completion. This effectively considers all
variables captured by reference to be used after a yield point.
Fixes#84292.
This shows up to 5% less instruction counts on multiple benchmarks, and up to
19% wins on the -j1 wall times for rustc self-compilation.
We can afford to spend the extra cycles building LLVM essentially once more for
the x86_64-unknown-linux-gnu CI build today. The builder finishes in around 50
minutes on average, and this adds just 10 more minutes. Given the sizeable
improvements in compiler performance, this is definitely worth it.
Stabilize and document `--force-warn`
This PR will stabilize and document the `--force-warn` command line option. It is currently a draft, pending an FCP.
I've taken the liberty of tidying up the lint level command line options a bit as part of this. The changes are quite minor and should only affect rustc's help output. I'm making them here because they're trivial and, in one case, necessary to unify the way `--force-warn` with the way the other options are displayed.
I also want to mention that `@rylev` has done a ton of work on moving this along and deserves most of the credit. I'm just the one who landed up writing this particular PR.
Resolves#86516.
Liveness analysis for generators assumes that execution always continues
normally after a yield point, not accounting for the fact that generator
could be dropped before completion.
If generators captures any variables by reference, those variables could
be used within a generator, or when the generator completes, but also
after each yield point in the case the generator is dropped.
Account for the case when generator is dropped after yielding, but
before running to the completion. This effectively considers all
variables captured by reference to be used after a yield point.
Remove `Session.used_attrs` and move logic to `CheckAttrVisitor`
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Warn about unreachable code following an expression with an uninhabited type
This pull request fixes#85071. The issue is that liveness analysis currently is "smarter" than reachability analysis when it comes to detecting uninhabited types: Unreachable code is detected during type checking, where full type information is not yet available. Therefore, the check for type inhabitedness is quite crude:
https://github.com/rust-lang/rust/blob/fc81ad22c453776de16acf9938976930cf8c9401/compiler/rustc_typeck/src/check/expr.rs#L202-L205
i.e. it only checks for `!`, but not other, non-trivially uninhabited types, such as empty enums, structs containing an uninhabited type, etc. By contrast, liveness analysis, which runs after type checking, can benefit from the more sophisticated `tcx.is_ty_uninhabited_from()`:
https://github.com/rust-lang/rust/blob/fc81ad22c453776de16acf9938976930cf8c9401/compiler/rustc_passes/src/liveness.rs#L981https://github.com/rust-lang/rust/blob/fc81ad22c453776de16acf9938976930cf8c9401/compiler/rustc_passes/src/liveness.rs#L996
This can lead to confusing warnings when a variable is reported as unused, but the use of the variable is not reported as unreachable. For instance:
```rust
enum Foo {}
fn f() -> Foo {todo!()}
fn main() {
let x = f();
let _ = x;
}
```
currently leads to
```
warning: unused variable: `x`
--> t1.rs:5:9
|
5 | let x = f();
| ^ help: if this is intentional, prefix it with an underscore: `_x`
|
= note: `#[warn(unused_variables)]` on by default
warning: 1 warning emitted
```
which is confusing, because `x` _appears_ to be used in line 6. With my changes, I get:
```
warning: unreachable expression
--> t1.rs:6:13
|
5 | let x = f();
| --- any code following this expression is unreachable
6 | let _ = x;
| ^ unreachable expression
|
= note: `#[warn(unreachable_code)]` on by default
note: this expression has type `Foo`, which is uninhabited
--> t1.rs:5:13
|
5 | let x = f();
| ^^^
warning: unused variable: `x`
--> t1.rs:5:9
|
5 | let x = f();
| ^ help: if this is intentional, prefix it with an underscore: `_x`
|
= note: `#[warn(unused_variables)]` on by default
warning: 2 warnings emitted
```
My implementation is slightly inelegant because unreachable code warnings can now be issued in two different places (during type checking and during liveness analysis), but I think it is the solution with the least amount of unnecessary code duplication, given that the new warning integrates nicely with liveness analysis, where unreachable code is already implicitly detected for the purpose of finding unused variables.
Get piece unchecked in `write`
We already use specialized `zip`, but it seems like we can do a little better by not checking `pieces` length at all.
`Arguments` constructors are now unsafe. So the `format_args!` expansion now includes an `unsafe` block.
<details>
<summary>Local Bench Diff</summary>
```text
name before ns/iter after ns/iter diff ns/iter diff % speedup
fmt::write_str_macro1 22,967 19,718 -3,249 -14.15% x 1.16
fmt::write_str_macro2 35,527 32,654 -2,873 -8.09% x 1.09
fmt::write_str_macro_debug 571,953 575,973 4,020 0.70% x 0.99
fmt::write_str_ref 9,579 9,459 -120 -1.25% x 1.01
fmt::write_str_value 9,573 9,572 -1 -0.01% x 1.00
fmt::write_u128_max 176 173 -3 -1.70% x 1.02
fmt::write_u128_min 138 134 -4 -2.90% x 1.03
fmt::write_u64_max 139 136 -3 -2.16% x 1.02
fmt::write_u64_min 129 135 6 4.65% x 0.96
fmt::write_vec_macro1 24,401 22,273 -2,128 -8.72% x 1.10
fmt::write_vec_macro2 37,096 35,602 -1,494 -4.03% x 1.04
fmt::write_vec_macro_debug 588,291 589,575 1,284 0.22% x 1.00
fmt::write_vec_ref 9,568 9,732 164 1.71% x 0.98
fmt::write_vec_value 9,516 9,625 109 1.15% x 0.99
```
</details>
bors