rustc_target: Remove unused Arch::PowerPC64LE
This variant has been added in https://github.com/rust-lang/rust/pull/147645, but actually unused since target_arch for powerpc64le- targets is "powerpc64". (The difference between powerpc64- and powerpc64le- targets is identified by target_endian.)
Note: This is an internal cleanup and does NOT remove `powerpc64le-*` targets.
This commit adds basic `efiapi` ABI support for LoongArch by recognizing
`extern "efiapi"` in the ABI map and inline asm clobber handling, and
mapping it to the C calling convention.
This change is intentionally submitted ahead of the full LoongArch UEFI
target support. While UEFI binaries are ultimately produced as PE images,
LoongArch UEFI applications can already be developed by building ELF
objects, applying relocation fixups, and converting them to PE in a
later step. For such workflows, having `efiapi` properly recognized by
the compiler is a prerequisite, even without a dedicated UEFI target.
Landing this ABI support early helps unblock LoongArch UEFI application
and driver development, and allows the remaining UEFI-specific pieces to
be introduced incrementally in follow-up patches.
MCP: https://github.com/rust-lang/compiler-team/issues/953
Update the tests, add powerpc-*-gnuspe testing, and create a distinct
clobber_abi list for PowerPC SPE targets.
Note, the SPE target does not have vector, vector-scalar, or
floating-point specific registers.
This register is only supported on the *powerpc*spe targets. It is
only recognized by LLVM. gcc does not accept this as a clobber, nor
does it support these targets.
This is a volatile register, thus it is included with clobber_abi.
Prepare for additional enums like Vendor and Os which have true
`Unknown` variants. We want to use the same name for the escape hatch
for all of these, thus rename this one.
Relax r29 inline asm restriction on PowerPC64 targets
LLVM uses r29 to hold a base pointer for some PowerPC target configurations. It is usable on all 64 bit targets as a callee save register.
r? `@Amanieu`
Where supported, VSX is a 64x128b register set which encompasses
both the floating point and vector registers.
In the type tests, xvsqrtdp is used as it is the only two-argument
vsx opcode supported by all targets on llvm. If you need to copy
a vsx register, the preferred way is "xxlor xt, xa, xa".
show supported register classes in error message
a simple diagnostic change that shows the supported register classes when an invalid one is found.
This information can be hard to find (especially for unstable targets), and this message now gives at least something to try or search for. I've followed the pattern for invalid clobber ABIs.
`@rustbot` label +A-inline-assembly
rustc_target has had a lot of weird reexports for various reasons, but
now we're at a point where we can actually start reducing their number.
We remove weird shadowing-dependent behavior and import directly from
rustc_abi instead of doing weird renaming imports.
This is only incremental progress and does not entirely fix the crate.
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
Support input/output in vector registers of PowerPC inline assembly
This extends currently clobber-only vector registers (`vreg`) support to allow passing `#[repr(simd)]` types as input/output.
| Architecture | Register class | Target feature | Allowed types |
| ------------ | -------------- | -------------- | -------------- |
| PowerPC | `vreg` | `altivec` | `i8x16`, `i16x8`, `i32x4`, `f32x4` |
| PowerPC | `vreg` | `vsx` | `f32`, `f64`, `i64x2`, `f64x2` |
In addition to floats and `core::simd` types listed above, `core::arch` types and custom `#[repr(simd)]` types of the same size and type are also allowed. All allowed types and relevant target features are currently unstable.
r? `@Amanieu`
`@rustbot` label +O-PowerPC +A-inline-assembly
Fix target_feature handling in freg of LoongArch inline assembly
In LoongArch inline assembly, freg currently always accepts f32/f64 as input/output.
https://github.com/rust-lang/rust/blob/9b4d7c6a40b328d212095c28670c629facf1557d/compiler/rustc_target/src/asm/loongarch.rs#L41
However, these types actually require f/d target features as in RISC-V.
Otherwise, an (ugly) compile error will occur: https://godbolt.org/z/K61Gq1E9E
f32/f64 without f:
```
error: couldn't allocate output register for constraint '{$f1}'
--> <source>:12:11
|
12 | asm!("", in("$f1") x, lateout("$f1") y);
| ^
```
f64 with f but without d:
```
error: scalar-to-vector conversion failed, possible invalid constraint for vector type
--> <source>:19:11
|
19 | asm!("", in("$f1") x, lateout("$f1") y);
| ^
```
cc ``@heiher``
r? ``@Amanieu``
``@rustbot`` label +O-LoongArch +A-inline-assembly
This commit adds the relevant registers to the list of clobbered regis-
ters (part of #93335). This follows the [ABI documentation] of AVR-GCC:
> The [...] call-clobbered general purpose registers (GPRs) are
> registers that might be destroyed (clobbered) by a function call.
>
> - **R18–R27, R30, R31**
>
> These GPRs are call clobbered. An ordinary function may use them
> without restoring the contents. [...]
>
> - **R0, T-Flag**
>
> The temporary register and the T-flag in SREG are also call-
> clobbered, but this knowledge is not exposed explicitly to the
> compiler (R0 is a fixed register).
Therefore this commit lists the aforementioned registers `r18–r27`,
`r30` and `r31` as clobbered registers. Since the `r0` register (listed
above as well) is not available in inline assembly at all (potentially
because the AVR-GCC considers it a fixed register causing the register
to never be used in register allocation and LLVM adopting this), there
is no need to list it in the clobber list (the `r0`-variant is not even
available). A comment was added to ensure, that the `r0` gets added to
the clobber-list once the register gets usable in inline ASM.
Since the SREG is normally considered clobbered anyways (unless the user
supplies the `preserve_flags`-option), there is no need to explicitly
list a bit in this register (which is not possible to list anyways).
Note, that this commit completely ignores the case of interrupts (that
are described in the ABI-specification), since every register touched in
an ISR need to be saved anyways.
[ABI documentation]: https://gcc.gnu.org/wiki/avr-gcc#Call-Used_Registers
Fix clobber_abi in RV32E and RV64E inline assembly
Currently clobber_abi in RV32E and RV64E inline assembly is implemented using InlineAsmClobberAbi::RiscV, but broken since x16-x31 cannot be used in RV32E and RV64E.
```
error: cannot use register `x16`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x17`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x28`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x29`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x30`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x31`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
```
r? `@Amanieu`
`@rustbot` label O-riscv +A-inline-assembly
Basic inline assembly support for SPARC and SPARC64
This implements asm_experimental_arch (tracking issue https://github.com/rust-lang/rust/issues/93335) for SPARC and SPARC64.
This PR includes:
- General-purpose registers `r[0-31]` (`reg` register class, LLVM/GCC constraint `r`)
Supported types: i8, i16, i32, i64 (SPARC64-only)
Aliases: `g[0-7]` (`r[0-7]`), `o[0-7]` (`r[8-15]`), `l[0-7]` (`r[16-23]`), `i[0-7]` (`r[24-31]`)
- `y` register (clobber-only, needed for clobber_abi)
- preserves_flags: Integer condition codes (`icc`, `xcc`) and floating-point condition codes (`fcc*`)
The following are *not* included:
- 64-bit integer support on SPARC-V8+'s global or out registers (`g[0-7]`, `o[0-7]`): GCC's `h` constraint (it seems that there is no corresponding constraint in LLVM?)
- Floating-point registers (LLVM/GCC constraint `e`/`f`):
I initially tried to implement this, but postponed it for now because there seemed to be several parts in LLVM that behaved differently than in the LangRef's description.
- clobber_abi: Support for floating-point registers is needed.
Refs:
- LLVM
- Reserved registers https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/Sparc/SparcRegisterInfo.cpp#L52
- Register definitions https://github.com/llvm/llvm-project/blob/llvmorg-19.1.0/llvm/lib/Target/Sparc/SparcRegisterInfo.td
- Supported constraints https://llvm.org/docs/LangRef.html#supported-constraint-code-list
- GCC
- Reserved registers https://github.com/gcc-mirror/gcc/blob/63b6967b06b5387821c4e5f2c113da6aaeeae2b7/gcc/config/sparc/sparc.h#L633-L658
- Supported constraints https://gcc.gnu.org/onlinedocs/gcc/Machine-Constraints.html
- SPARC ISA/ABI
- (64-bit ISA) The SPARC Architecture Manual, Version 9
(32-bit ISA) The SPARC Architecture Manual, Version 8
(64-bit ABI) System V Application Binary Interface SPARC Version 9 Processor Supplement, Rev 1.35
(32-bit ABI) System V Application Binary Interface SPARC Processor Supplement, Third Edition
The above docs can be downloaded from https://sparc.org/technical-documents
- (32-bit V8+ ABI) The V8+ Technical Specification
https://temlib.org/pub/SparcStation/Standards/V8plus.pdf
cc `@thejpster` (sparc-unknown-none-elf target maintainer)
(AFAIK, other sparc/sprac64 targets don't have target maintainers)
r? `@Amanieu`
`@rustbot` label +O-SPARC +A-inline-assembly
Ralf Jung