tree-wide: parallel: Fully removed all `Lrc`, replaced with `Arc`
tree-wide: parallel: Fully removed all `Lrc`, replaced with `Arc`
This is continuation of https://github.com/rust-lang/rust/pull/132282 .
I'm pretty sure I did everything right. In particular, I searched all occurrences of `Lrc` in submodules and made sure that they don't need replacement.
There are other possibilities, through.
We can define `enum Lrc<T> { Rc(Rc<T>), Arc(Arc<T>) }`. Or we can make `Lrc` a union and on every clone we can read from special thread-local variable. Or we can add a generic parameter to `Lrc` and, yes, this parameter will be everywhere across all codebase.
So, if you think we should take some alternative approach, then don't merge this PR. But if it is decided to stick with `Arc`, then, please, merge.
cc "Parallel Rustc Front-end" ( https://github.com/rust-lang/rust/issues/113349 )
r? SparrowLii
`@rustbot` label WG-compiler-parallel
Fix deduplication mismatches in vtables leading to upcasting unsoundness
We currently have two cases where subtleties in supertraits can trigger disagreements in the vtable layout, e.g. leading to a different vtable layout being accessed at a callsite compared to what was prepared during unsizing. Namely:
### #135315
In this example, we were not normalizing supertraits when preparing vtables. In the example,
```
trait Supertrait<T> {
fn _print_numbers(&self, mem: &[usize; 100]) {
println!("{mem:?}");
}
}
impl<T> Supertrait<T> for () {}
trait Identity {
type Selff;
}
impl<Selff> Identity for Selff {
type Selff = Selff;
}
trait Middle<T>: Supertrait<()> + Supertrait<T> {
fn say_hello(&self, _: &usize) {
println!("Hello!");
}
}
impl<T> Middle<T> for () {}
trait Trait: Middle<<() as Identity>::Selff> {}
impl Trait for () {}
fn main() {
(&() as &dyn Trait as &dyn Middle<()>).say_hello(&0);
}
```
When we prepare `dyn Trait`, we see a supertrait of `Middle<<() as Identity>::Selff>`, which itself has two supertraits `Supertrait<()>` and `Supertrait<<() as Identity>::Selff>`. These two supertraits are identical, but they are not duplicated because we were using structural equality and *not* considering normalization. This leads to a vtable layout with two trait pointers.
When we upcast to `dyn Middle<()>`, those two supertraits are now the same, leading to a vtable layout with only one trait pointer. This leads to an offset error, and we call the wrong method.
### #135316
This one is a bit more interesting, and is the bulk of the changes in this PR. It's a bit similar, except it uses binder equality instead of normalization to make the compiler get confused about two vtable layouts. In the example,
```
trait Supertrait<T> {
fn _print_numbers(&self, mem: &[usize; 100]) {
println!("{mem:?}");
}
}
impl<T> Supertrait<T> for () {}
trait Trait<T, U>: Supertrait<T> + Supertrait<U> {
fn say_hello(&self, _: &usize) {
println!("Hello!");
}
}
impl<T, U> Trait<T, U> for () {}
fn main() {
(&() as &'static dyn for<'a> Trait<&'static (), &'a ()>
as &'static dyn Trait<&'static (), &'static ()>)
.say_hello(&0);
}
```
When we prepare the vtable for `dyn for<'a> Trait<&'static (), &'a ()>`, we currently consider the PolyTraitRef of the vtable as the key for a supertrait. This leads two two supertraits -- `Supertrait<&'static ()>` and `for<'a> Supertrait<&'a ()>`.
However, we can upcast[^up] without offsetting the vtable from `dyn for<'a> Trait<&'static (), &'a ()>` to `dyn Trait<&'static (), &'static ()>`. This is just instantiating the principal trait ref for a specific `'a = 'static`. However, when considering those supertraits, we now have only one distinct supertrait -- `Supertrait<&'static ()>` (which is deduplicated since there are two supertraits with the same substitutions). This leads to similar offsetting issues, leading to the wrong method being called.
[^up]: I say upcast but this is a cast that is allowed on stable, since it's not changing the vtable at all, just instantiating the binder of the principal trait ref for some lifetime.
The solution here is to recognize that a vtable isn't really meaningfully higher ranked, and to just treat a vtable as corresponding to a `TraitRef` so we can do this deduplication more faithfully. That is to say, the vtable for `dyn for<'a> Tr<'a>` and `dyn Tr<'x>` are always identical, since they both would correspond to a set of free regions on an impl... Do note that `Tr<for<'a> fn(&'a ())>` and `Tr<fn(&'static ())>` are still distinct.
----
There's a bit more that can be cleaned up. In codegen, we can stop using `PolyExistentialTraitRef` basically everywhere. We can also fix SMIR to stop storing `PolyExistentialTraitRef` in its vtable allocations.
As for testing, it's difficult to actually turn this into something that can be tested with `rustc_dump_vtable`, since having multiple supertraits that are identical is a recipe for ambiguity errors. Maybe someone else is more creative with getting that attr to work, since the tests I added being run-pass tests is a bit unsatisfying. Miri also doesn't help here, since it doesn't really generate vtables that are offset by an index in the same way as codegen.
r? `@lcnr` for the vibe check? Or reassign, idk. Maybe let's talk about whether this makes sense.
<sup>(I guess an alternative would also be to not do any deduplication of vtable supertraits (or only a really conservative subset) rather than trying to normalize and deduplicate more faithfully here. Not sure if that works and is sufficient tho.)</sup>
cc `@steffahn` -- ty for the minimizations
cc `@WaffleLapkin` -- since you're overseeing the feature stabilization :3
Fixes#135315Fixes#135316
Cast global variables to default address space
Pointers for variables all need to be in the same address space for correct compilation. Therefore ensure that even if a global variable is created in a different address space, it is casted to the default address space before its value is used.
This is necessary for the amdgpu target and others where the default address space for global variables is not 0.
For example `core` does not compile in debug mode when not casting the address space to the default one because it tries to emit the following (simplified) LLVM IR, containing a type mismatch:
```llvm
`@alloc_0` = addrspace(1) constant <{ [6 x i8] }> <{ [6 x i8] c"bit.rs" }>, align 1
`@alloc_1` = addrspace(1) constant <{ ptr }> <{ ptr addrspace(1) `@alloc_0` }>, align 8
; ^ here a struct containing a `ptr` is needed, but it is created using a `ptr addrspace(1)`
```
For this to compile, we need to insert a constant `addrspacecast` before we use a global variable:
```llvm
`@alloc_0` = addrspace(1) constant <{ [6 x i8] }> <{ [6 x i8] c"bit.rs" }>, align 1
`@alloc_1` = addrspace(1) constant <{ ptr }> <{ ptr addrspacecast (ptr addrspace(1) `@alloc_0` to ptr) }>, align 8
```
As vtables are global variables as well, they are also created with an `addrspacecast`. In the SSA backend, after a vtable global is created, metadata is added to it. To add metadata, we need the non-casted global variable. Therefore we strip away an addrspacecast if there is one, to get the underlying global.
Tracking issue: #135024
When LLVM's location discriminator value limit is exceeded, emit locations with dummy spans instead of dropping them entirely
Dropping them fails `-Zverify-llvm-ir`.
Fixes#135332.
r? `@jieyouxu`
Revert most of #133194 (except the test and the comment fixes). Then refix
not emitting locations at all when the correct location discriminator value
exceeds LLVM's capacity.
Pointers for variables all need to be in the same address space for
correct compilation. Therefore ensure that even if a global variable is
created in a different address space, it is casted to the default
address space before its value is used.
This is necessary for the amdgpu target and others where the default
address space for global variables is not 0.
For example `core` does not compile in debug mode when not casting the
address space to the default one because it tries to emit the following
(simplified) LLVM IR, containing a type mismatch:
```llvm
@alloc_0 = addrspace(1) constant <{ [6 x i8] }> <{ [6 x i8] c"bit.rs" }>, align 1
@alloc_1 = addrspace(1) constant <{ ptr }> <{ ptr addrspace(1) @alloc_0 }>, align 8
; ^ here a struct containing a `ptr` is needed, but it is created using a `ptr addrspace(1)`
```
For this to compile, we need to insert a constant `addrspacecast` before
we use a global variable:
```llvm
@alloc_0 = addrspace(1) constant <{ [6 x i8] }> <{ [6 x i8] c"bit.rs" }>, align 1
@alloc_1 = addrspace(1) constant <{ ptr }> <{ ptr addrspacecast (ptr addrspace(1) @alloc_0 to ptr) }>, align 8
```
As vtables are global variables as well, they are also created with an
`addrspacecast`. In the SSA backend, after a vtable global is created,
metadata is added to it. To add metadata, we need the non-casted global
variable. Therefore we strip away an addrspacecast if there is one, to
get the underlying global.
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
The maximum discriminator value LLVM can currently encode is 2^12. If macro use
results in more than 2^12 calls to the same function attributed to the same
callsite, and those calls are MIR-inlined, we will require more than the maximum
discriminator value to completely represent the debug information. Once we reach
that point drop the debug info instead.
The test relies on the fact that inlining more than 2^12 calls at the same
callsite will trigger a panic (and after the following commit, a warning) due to
LLVM limitations but with collapse_debuginfo the callsites should not be the
same.
the behavior of the type system not only depends on the current
assumptions, but also the currentnphase of the compiler. This is
mostly necessary as we need to decide whether and how to reveal
opaque types. We track this via the `TypingMode`.
CFI: Append debug location to CFI blocks
Currently we're not appending debug locations to the inserted CFI blocks. This shows up in #132615 and #100783. This change fixes that by passing down the debug location to the CFI type-test generation and appending it to the blocks.
Credits also belong to `@jakos-sec` who worked with me on this.
LLVM does not expect to ever see multiple dbg_declares for the same variable at the same
location with different values. proc-macros make it possible for arbitrary code,
including multiple calls that get inlined, to happen at any given location in the source
code. Add discriminators when that happens so these locations are different to LLVM.
This may interfere with the AddDiscriminators pass in LLVM, which is added by the
unstable flag -Zdebug-info-for-profiling.
Fixes#131944
bors